TP-Link - Deco X20

Deco. Asus has done me dirty too many times to EVER buy something from them again. Don't warranty me twice. Get out of my house.

Sounds like you probably want a mesh system. Maybe one with three or more APs (one where the internet comes in the house then two elsewhere) A lot of them work as routers too, but I use mine in AP mode as I have a PFsense router I put together. If your actual router is okay you could get a mesh system and just use it in AP mode. My setup is Modem(virgin hub) > PFsense > switches and stuff > APs Mine are TP-Link Decos. They're pretty reliable and not too expensive but there's loads to choose from. If I had the money I'd like some Ubiquiti ones but honestly I don't have any issues with the Decos. I can't say anything about their router mode though as I've never used it. Tenda is another popular brand but I haven't tried it myself

I have a deco, nothing but trouble. Read the tp link subreddit about dropped connections. If you work from home this is not for you

Go for Mesh! And get yourself a Deco. Amazing experience

Agree, Deco mesh is very good, took a bit of adjusting in my flat - the walls seemed to be lined with lead.

It works pretty well. I think bridge or pass through mode is a better way. But if you can't change the settings, then this way works

Re-iterating what others have stated. They work great when you hardware each unit. I am not a fan of wireless backhaul. In theory it should work, but in reality I find them lacking. I have recently done a Deco install and an Eero install, hardwiring all units for both. It is sometimes cheaper to do it this way than buying APs to wire in. Just remember to have the "Main" mesh unit first in the chain. I usually go Internet Modem -> First Mesh Unit -> switch -> satellites.

Deco's are a great product. Ideally you could ethernet backhaul your wifi somehow. I highly recommend trying to make that happen if you can.

Initially, I had an issue where DNS resolution was failing on only some web sites, so they were just not loading and if TM reset things on their end, it seemed to work for a day or two but problem returned. Long story, short... factory reset on their end Deco fixed the problem. I think the AI didn't like me changing to TM. No problems since.

Mesh will have a potentially hard time with the concrete, wifi simply doesn't penetrate - so mesh will be problematic - placement would be key, the satellites need to have a good signal from the base to work well. You might get away with it by placing them near doorways etc. Many people use ethernet along the base of the walls, over doorway frames etc. and wire access points. Mesh systems do have the advantage of a central controller for the access points, so if you can wire them, your wifi experience would be a lot better. I am not a fan of Netgear, TP-Link Deco is popular in this sub, as is Eero (but there's the fact that it's Amazon and has a semi-subscription model. If you want to be a little more spendy, Ubiquiti UniFi has a great interface and good quality that should last. The UniFi Express models have a built in AP and can be meshed. The Cloud Gateway Ultras would be ideal with multiple access points placed around. (I am a UniFi fan) Asus is also mostly well thought of. I think the TP-Link Deco line would be the most affordable choice.

I was between the s7 - x10 a few days ago. The S7 seemed good to me because of the 2.5G band and price ratio, regardless of what type of Wi-Fi it was (5). But always studying which is the best option Quality-benefit-price, I was between the x20 and x50, already with WiFi 6 and with promising speeds in 2.5g and 5g and that there was very little direction in prices, I went directly for the x20, today it arrived, I'll have to try it.

I had the same issue. To resolve is to connect to the same node your PS5 is connected to. I had to force the connection via the TP-Link Deco app to ensure the portal connected to the correct node. If you want to roam the whole house you will need to hardwire the nodes together with Ethernet.

I've tried Orbi and Deco... Deco at least has more options but I had a lot of issues walking around the house and the switching between nodes taking a long time or unable to get a full Internet access once reconnected.

I have one of their combined routers and modems. I still run 3 decos across the house broadcasting is own signal. No issues.

We had an older Google WiFi system we just replaced with a Deco system. Night and day difference in terms of reliability.

I've had great luck with TP-Link Deco systems

Eero (Amazon), tp link Deco, and Asus ZenWifi are all well-reviewed and perform well. If you've got to go mesh, look for a tri-band system with a dedicated backhaul channel (Eero, Deco, and ZenWifi all have models). Eero and Deco are a little more "plug and play". ZenWifi is also easy to set up, and some models give a few more config options/control than Eero or deco. The tricky part is that you don't know how well mesh will perform until you set it up in your place. Two nodes might be enough, but you might need three (or four). A 6 ghz backhaul channel might work, but, if the walls and floors in your place cause a lot of interference, you might see better perf with a 5 ghz backhaul. So buy from a place you can return it, maybe start with three nodes, test how coverage and speeds look, go from there. All three have 2.5 Gbps ports. 3 gig is a *lot* of bandwidth for a residential setup. Unless you're regularly downloading gigantic files (video, game updates), you probably won't exceed ~300-500 Mbps, and WiFi will de facto limit the perf on any device to ~200-600 Mbps. For most homes, 200 Mbps is plenty. If the 3 gig price isn't much different than ~300 Mbps (if you're in the US, it's hard to find service under ~300 Mbps), go for it, but if you're paying a premium for 3 gig, you can save some coin and you almost certainly won't notice a difference in performance. If you're in Europe, you rule!, fiber away because you're prob only paying like €40 for 3 gig.

I have DecoX20 and am about to set up a smarthome. Is this not a good choice for a Home mesh system using HomeKit?

I did. I have one house with 3 decos and spectrum and another house with 5 decos on optimum and no issues on either. I named both ssids on the decos the same so every device connects in both houses.

this needs so many more upvotes! I have having a nightmare with my networked PC's, some plugged into the ISP router and some on the wifi. They weren't showing up under worked PC's in windows and once i switched the Deco's to AccessPt Mode... everything fixed. I can connect to either the Deco AP mesh, or directly to the ISP router and all pc's can now see each other! Finally a good explanation on the matter :)

Upgrade to Wifi 6E. It's quite the jump. Not just in speeds, but how the connections are handled. You want 2x2 MIMO at least on the router side for that many devices. The Deco line works well and is easy to set and forget. You can pay huge premium for Wifi7 and enjoy that, or just realize that 200-400mbps real world speed over wifi 6 or 500-750 on wifi6e will be just fine.

Can confirm. Have Deco. Am miserable.